BARRELS |
Type |
Models |
Moc |
Capacity | Size(mm) |
Cinfig |
| Plating |
Brito (Junior) |
PP |
3 to 4 |
300L x 150 A/F |
Hexagonal |
| Brito (Junior) |
PP |
5 to 6 |
300L x 200 A/F |
Hexagonal |
|
| Brito (Large) |
PP |
12 to 15 |
450L x 250 A/F |
Hexagonal |
|
| Custom Built |
SS |
25 to 100 |
Hexagonal / Round |
||
| Phosphating |
Custom Built |
25 to 100 |
Round |
||
| Fixed Type |
Mite |
Acrylic/pp |
1/2 to 3/4 |
175L X 100A/F |
Hexagonal |
|
|
|||||
| (Manual) |
Super compact |
PP |
12 to 15 |
450L X 250A/F |
Hexagonal |
New compact |
PP |
30 to 40 |
730L X 300A/F |
Hexagonal |
|
| Open Walled |
For Spokes |
PP |
22 |
Hexagonal |
|
| Tumbling View Image |
Polishing |
Ms/ Rl |
25 |
Octagonal |
|
Auto lid opening / closing: Can be provided at loading / unloading station.
Unloading chute : This is a funnel shaped flat chute made of PP / SS which allows for easier unloading of components onto a basket from the barrel.
Drip tray : This novel arrangement helps in reduction of carry-over of solution at each station, by directly placing a pneumatically operated or rack and pinion type tray below the barrel, while it is being lifted out of a tank. The collected solution is then drained into a pipe manifold and sent directly to the ETP.
This substantially reduces the contamination at each station by over 15%.
Drip accelerator : This design feature helps in a faster drip of the solution from the barrel, thus reducing the drip time at each station and at the same time decreasing the carry-over of solution by over 30%.
Reversible direction of rotation : By reversing the rotation of the barrel after lifting, the components are made to tumble with greater efficiency, thus increasing the flow of the drip. This results in reduced carry-over at each rotation station as well as during traversing.
Direct drive / Chain drive : Such drive mechanisms are designed, depending on the operational requirements.
Fume Exhauster : Provided on transport wagons for exhausting fumes emanating from the barrel during transit.